Rebuild and Update EVO Modular Hot-End Assembly

Get more done in less time with the EVO QuickChange Modular Hot End, now including Delrin feeders for optimum versatility. With an industry-leading material deposition rate, the QuickChange Modular Hot End is built to manufacture large parts quickly. A cartridge-style planetary extruder assembly achieves increased torque capacity for faster extrusion speeds while an unbreakable three-bolt-reinforced hot end precisely distributes over 40 materials ranging from PLA and ABS to exotic materials, including carbon-fiber-reinforced nylon and PC as well as HydroFill, Airwolf 3D’s patent-pending water-soluble support.

Performance is further optimized by extended-life replaceable nozzles that help minimize part distortion

Be Prepared: Keep a Spare Modular Hot End on Hand

While the QuickChange Hot End is ready for the most demanding applications, it is recommended to keep a spare hot end on hand to minimize downtime in the event that the hot end becomes inoperable.

Optimize Your Workflow With Dedicated Hot Ends For Different Materials and Nozzle Sizes

Powerusers printing a large volume of parts in more than one material also opt to dedicate specific hot end assemblies to each specific material with which they work. This is particularly helpful if you often print in one or more materials with disparate print temperatures. For example, having individual hot ends dedicated to different materials like polycarbonate and PLA eliminates the time needed to purge the hot end thoroughly between high-temperature polycarbonate and low-temperature PLA print jobs.

Similarly, if you often find yourself switching nozzle sizes for different applications, save time by using separate hot ends outfitted with different nozzle sizes. Printing with a 0.5mm nozzle and need to switch off to a finer resolution 0.35mm nozzle? No problem, easily swap out your hot ends and keep your production schedule on track.  For more versatility with flexible materials, purchase our Teflon feeders as well.