Add to Wishlist
hips 3d printer filament

HIPS 3D Printer Filament is High Impact Polystyrene

$68.00

Airwolf 3D is proud to announce the release of a new HIPS 3D printer filament. The key to successful 3D prints is good quality material, and with Airwolf 3Dƒ??s new line of HIPS filament, high quality is no exception. We test each batch of filament ourselves to ensure high standards, absolute top quality and consistent diameter.

2.2lb of 2.88mm HIPS Professional 3D Printer Filament

Material Safety Data Sheet (MSDS)
What are the hardware requirements?
A heated bed and 240?øC hot end. All JR/JRx/JR2x hotends are compatible. If using as a support material, you must use the JR2x.

Our HIPS filament is moisture sensitive and should be kept bagged with desiccant. The filament is very tough and easy to feed into the printer.

2.2lb. spool is compatible with Airwolf models: AW3D AXIOM, HDR, HD, HDx and HD2x Desktop 3D Printers

Add to Wishlist
SKU: F09903 Category:

HIPS is short for High Impact Polystyrene. This 3D printer filament has very similar properties to ABS and works well as a support material using Limonene to dissolve it. This makes complex printing easier to achieve and will save you some trouble as break-away support is not always easy to deal with, and it usually needs to be sanded afterwards.

You can print with HIPS as it has less warping than some materials, but it is mostly used at Airwolf 3D alongside our high-grade ABS filaments as support material which will be dissolved away after 3d printing.

Type: HIPS 3D Printer Filament

Diameter: 2.88mm +/-0.10.
Weight: 2.2lb +/- 0.1.
Printing tips:
Temp: 240-260C
General: purge thoroughly
Color: Natural/White

Shipping Weight 2 lbs
Shipping Dimensions 8 × 8 × 3 in