NYLON 680 Filament
$70.00
Semi-flexible
Impact Resistant
Fatigue Resistant
Does not shrink as much as traditional nylons
Extrudes at a lower temperature than other nylons
NYLON 680 Filament
Nylon 680
FDA approved for applications requiring contact with food or beverages. Has ability to handle high temperatures inherent with steam, boiling water and dishwasher usage. This Nylon is specifically developed for FFF 3D printing and has a consistent melt viscosity.  Nylon 680 is a CAS Reg. No. 51995-62-1 Nylon 6/69.
Filament Properties
Nylon 680 Filament
- Semi-flexible
- Impact Resistant
- Fatigue Resistant
- Available in White or Black color
Sample Uses:
- Prosthesis
- Medical jigs and fixtures
- Gears
Technical
| HS Code | 3916.9 |
| THERMAL | |
| Printing Temperature | 250C-255C |
| Melting Temperature | 210C |
| Tg Glass Transition | 93C |
| Pyrolysis - Thermal degradation | 351C |
| Non-Destructive Evaluation | YES |
| Print-Bed Temp | 30-65C |
| Ambient Temp (Enclosure) | 30 - 100C |
| PHYSICAL | |
| Nominal Diameter (3mm Maximum Dia) | 2.85 mm |
| Weight / spool | 1 lb |
| Nominal Lenght / spool (in feet) | 180 |
| Shrinkage - in/in | 0.0033 |
| Solvent/glue | ComPlete |
| MECHANICAL | |
| Tensile Stress "PSI" when 3D Printed | 6,900 |
| Ultimate Elongation when 3D Printed | 34% |
| Modulus "PSI" when 3D Printed | N/A |
| OPTICAL | |
| Opacity | 70% |
| Reflectivity | N/A |
| Color | Natural |
| APPROVALS | |
| FDA - Direct Food Contact | YES |
| FDA Direct Drink Contact | YES |
| UL FLAMMABILITY | |
| UL 94 HB | YES |
| UL 94 V2 at 1.5 mm thickness | YES |
Post Process capability:
Nylon 680 filament is compatible with Ethylene oxide and Flash Steam post processing.
Note:Â Nylon is hygroscopic and any water based processing will require a longer dry time.
Shipment:
Vacuum sealed w/ desiccant pouches.
| Shipping Weight | 1.1 lbs |
|---|---|
| Shipping Dimensions | 3 × 3 × 3 in |
| Color | Black 2.2lbs, Natural 2.2lbs |
| Heated Bed | No |
| Recommended Build Surface | Wolfbite NITRO |
| Extruder Temperature | 250C – 255C |
| Bed Temperature | 30C – 65C |
| Diameter | 2.88mm |
| Compatible Machine | AXIOM, AXIOM 20, AXIOM Dual Extruder, EVO |
| Applications | Chemical dip and tank supports, Chemical resistant equipment covers, Electroplating supports and hangers, High end gears and cams, Industrial vibration isolators and damping parts, Large motor mounting, Prosthetics, Pulleys, mounts and brackets for machines, Sand Blast Masking |
| Specifications | |
| Tensile Strength | |
|---|---|
| Elongation at Break | |
| Extruder Temperature | 250C – 255C |
| Bed Temperature | 30C – 65C |
| Heated Bed | No |
| Recommended Build Surface | Wolfbite NITRO |
| Diameter | 2.88mm |
| Color | Black 2.2lbs, Natural 2.2lbs |
| Compatible Machine | AXIOM, AXIOM 20, AXIOM Dual Extruder, EVO |
| Applications | Chemical dip and tank supports, Chemical resistant equipment covers, Electroplating supports and hangers, High end gears and cams, Industrial vibration isolators and damping parts, Large motor mounting, Prosthetics, Pulleys, mounts and brackets for machines, Sand Blast Masking |