UPDATES

EVO Firmware (embedded in TouchScreen updates – no need to update separately)

Genesis Circuit Board is Developed by Airwolf 3D and Exclusively for Airwolf 3D Printers

Version History

  • 1.61.9 – 8/7/2023
    • EVO 2X added
    • M221 flow adjustment
    • Improved nozzle cleaning
  • 1.61.8 – 3/26/2023
    • Auto-leveling accuracy improved
    • XY offset calibration improved
    • Cura-generated gCode accuracy improved
  • 1.61.2 – 1/10/2023
    • Level comp
    • Auto-leveling speed and accuracy improved
    • Z accuracy improved
    • Increase Z adjustment for MaxGrip build plate
  • 1.60.8 – 3/4/2022
    • Higher print quality at faster speeds
    • Improved smoothness
  • 1.60.2 – 1/5/2022
    • Auto-leveling accuracy and speed improved
    • Adjustable motor current for different materials
  • 1.59.1 – 7/16/2021
    • Added Z offsets to “K” to permit alternative surfaces on build plate
    • Left and right nozzle Z offsets measured to determine levelity
    • X/Y offsets for right nozzle independently adjustable to align colors
  • 1.58.17 – 5/1/2021
    • Improve high-speed merging
    • Offset now adjustable without changing firmware
  • 1.58.14 – 2/17/2021
    • Fixed periodic over extruding
    • Improved X/Y/Z synchronization
    • Finer z offset adjustments
  • 1.58.11 – 11/29/2020
    • Improve auto-leveling accuracy
  • 1.58.9 – 7/17/2020
    • E functionality improved
    • Reduce current settings
  • 1.58.8 – 2/21/2020
    • Z probe only active when nozzle is auto-leveling
    • Side fans modulate if extruder temp lowers more than 4 degrees
    • Spread cycle added to quite down printer
  • 1.58.7 – 8/13/2019
    • EVO R added
  • 1.58.1 – 11/12/2018
    • Control algorithms improved
    • EVO 22 added

ALL SOFTWARE UDPATES